It is important that you make sure that your network is configured to use LiveU Studio so you don't have to worry about the device on which you manage your feed.

TO USE LIVEU STUDIO SERVICES, THERE ARE SOME NETWORK PREREQUISITES.

We use HTTP, HTTPS, RTMP, and WebRTC protocols, please check with your IT department to ensure that these protocols are not blocked.

LiveU Studio uses sending and receiving on the following ports to allow live broadcasting:
■ 80/TCP (HTTP)
■ 443/TCP (HTTPS)
■ 1935/TCP+UDP (RTMP)
■ 8080/TCP+UDP (SRT)
■ 1024-65535/UDP (WebRTC)

In addition, there must not be any firewalls installed that block HTTP, HTTPS, RTMP, or WebRTC protocols.

These ports must be open to any public IP address.
If this is not doable, it is necessary to allow AWS servers to work with your network, as our services are cloud-based on AWS.

Reserved Bandwidth

• Per operator in the Control Room: 2Mb/s download per source + about 5Mb/s upload (If the operator is NOT a source or have sources to upload to LiveU Studio).
• Per operator in the Multiview: 2Mb/s download per source + 5Mb/s upload

If you still can't visualize your feed, we invite you to contact your LiveU sales representative.

• We strongly recommend the use of the latest version of the Google Chrome browser. Thank you to check also in your Chrome settings that cookies are accepted on all sites.

If your network is very restricted please have a look at the following network rules needed to use and acces the Studio: